User Guide Product(range) - Neopost

More documents

Recommendations

Info

To ADD CREDIT, please refer to "Credifon Recrediting". 4.2.6 High Value Selection If a value greater than or equal to the High Value setting is selected, the machine will not print unless the high value setting is confirmed. The default High Value Threshold is set at a value fixed by P.O. Authority (To change the High Value setting, please refer to "IJ35/ 45 Machine Setup Menu"). Printing a high value If the high value is set to 1.00, from Ready Mode, set the required postage value (e.g. 1.75) and press to confirm. The High Value warning screen will now be observed: HIGH VALUE - ARE YOU SURE 1.75 DEPT MODE IMPRINT OK Printing is disabled. Press to return to Ready Mode screen with the High Value confirmed. If you wish to reject the High Value selection, enter the correct value and press to confirm. If you are franking more than one item at a high value, always check that the value is correct for all items being processed. YOU ARE NOW READY TO PROCESS YOUR MAIL 26 Franking your mail 4128500V/B 01/02/2006 IJ35-0024-26/A
4.2.7 Franking an Envelope Insert the envelope with the side to be printed facing upwards as illustrated. Press the button, after a short pause the motor will start. Franked envelopes will subsequently be deposited into the receiving tray. For an envelope exceeding 10mm thick, a label must be used, refer to "Franking Labels". 4.2.8 To Change a Department From Department Ready Mode, press the button to display the list of available departments, then using the and keys, or the appropriate number key, select your department from the list. Alternatively if selection is by Account number use the numerical keypad to input the account number of the department. Press to confirm. DEPARTEMENTS ESC 1 MARKETING 2 ACCOUNTS 3 SALES 4 5 OK If the department is protected, you will be prompted to enter your new Department PIN. Franking your mail 27 4128500V/B 01/02/2006 IJ35-0024-27/A
Page 1 and 2: WARNING! Do not under any circumsta
Page 3 and 4: INTRODUCTION Congratulations on cho
Page 5 and 6: CONTENTS 1. GENERAL SPECIFICATIONS
Page 7 and 8: 11. CLEARING MAIL PATH ............
Page 9 and 10: 1. GENERAL SPECIFICATIONS IJ35 IJ45
Page 11 and 12: 2.2 Franking machine 2.2.1 Attach t
Page 13 and 14: 2.2.5 Machine Connections Weigh Pla
Page 15 and 16: 2.2.6 Position Receiving Tray 2.2.7
Page 17 and 18: 3.2 Machine 1. Display presents a v
Page 19 and 20: 3.2.1 Display Panel Text Message Sl
Page 21 and 22: 4. FRANKING YOUR MAIL 4.1 Introduct
Page 23 and 24: If an incorrect PIN is entered for
Page 25: If an incorrect value is entered, p
Page 29 and 30: 5. FRANKING WITH AUTOFEED Used in c
Page 31 and 32: 6. FRANKING LABELS 6.1 Filling the
Page 33 and 34: If during the label printing proces
Page 35 and 36: 7.2 How do I calculate the correct
Page 37 and 38: If you wish to accept the Postage d
Page 39 and 40: * A Pre-loaded slogan can be overwr
Page 41 and 42: Using the and keys, or the appropri
Page 43 and 44: 9. MAINTAINING PRINT QUALITY Under
Page 45 and 46: ENTER STRAIGHTEST LINE NO. PRESS 5S
Page 47 and 48: Carefully withdraw the used Ink Car
Page 49 and 50: 10. METER REGISTERS Your franking m
Page 51 and 52: If after a short wait, you are retu
Page 53 and 54: 12. SERVER RECREDITING 12.1 Remote
Page 55 and 56: If for any other reason the re-cred
Page 57 and 58: 13. MEMORY FUNCTIONS Frequently use
Page 59 and 60: 14. SUPERVISOR SETTINGS 14.1 Introd
Page 61 and 62: The following functions may be acce
Page 63 and 64: 14.3.1 Changing the User PIN From t
Page 65 and 66: The following screen will be observ
Page 67 and 68: To change the Department PIN, enter
Page 69 and 70: 7. Default Stamp Value Enables the
Page 71 and 72: To return to the previous screen wi
Page 73 and 74: Default Stamp Value From the SETUP
Page 75 and 76: Using the and keys, or the appropri
Page 77 and 78:
14.6 Memory Cards The following mem
Page 79 and 80:
On completion of the downloading pr
Page 81 and 82:
If the method of print is set to EX
Page 83 and 84:
15. TROUBLE SHOOTING PROBLEM IJ35/4
Page 85 and 86:
15.1 Clearing a mail jam from the a
Page 87 and 88:
IJ-35/45 FRANKING MACHINE USER'S GU
Page 89:
4128500V/C 23/09/2009 IJ35-0023-04
show all

User Guide Product(range) - Neopost

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?