User Guide Product(range) - Neopost

More documents

Recommendations

Info

9.2 Making a Test Print Select the TEST PRINT option from the CARTRIDGE menu and press to confirm. CARTRIDGE 1 TEST PRINT 2 CLEAN 3 REMOVE ESC OK The prompt to produce a Test Print will now be displayed. PRESS START & INSERT ITEM 15/01/2002 To make a Test Print, insert a blank envelope or card and press . Inspect the Test Print to ensure that all lines are clear and present. To set the alignment, use the numerical keypad to enter the number that provides the straightest vertical line (for the example above line 5). 44 Maintaining print quality 4128500V/B 01/02/2006 IJ35-0024-44/A
ENTER STRAIGHTEST LINE NO. PRESS 5START ESC OK Press to confirm, you will be returned to the CARTRIDGE menu screen. If any lines are missing, repeat the cleaning and test print process up to three times, if this process fails to restore print quality, fit a new ink cartridge as detailed on "Replacing an ink cartridge". If the test print is satisfactory, press Mode. twice to return to Ready 9.3 Low Ink Should the ink cartridge require replacing, the LOW INK display will be observed: LOW INK 75.55 ACCOUNTS DEPT MODE IMPRINT 0.27 15/01/2002 To allow completion of batch, approximately 200 impressions are available, after which the Ink Cartridge MUST be replaced (see below). 9.4 No Ink When the NO INK display is observed, printing is disabled and the Ink Cartridge MUST be replaced immediately. NO INK 75.55 ACCOUNTS DEPT MODE IMPRINT 0.27 15/01/2002 Maintaining print quality 45 4128500V/B 01/02/2006 IJ35-0024-45/A
Page 1 and 2: WARNING! Do not under any circumsta
Page 3 and 4: INTRODUCTION Congratulations on cho
Page 5 and 6: CONTENTS 1. GENERAL SPECIFICATIONS
Page 7 and 8: 11. CLEARING MAIL PATH ............
Page 9 and 10: 1. GENERAL SPECIFICATIONS IJ35 IJ45
Page 11 and 12: 2.2 Franking machine 2.2.1 Attach t
Page 13 and 14: 2.2.5 Machine Connections Weigh Pla
Page 15 and 16: 2.2.6 Position Receiving Tray 2.2.7
Page 17 and 18: 3.2 Machine 1. Display presents a v
Page 19 and 20: 3.2.1 Display Panel Text Message Sl
Page 21 and 22: 4. FRANKING YOUR MAIL 4.1 Introduct
Page 23 and 24: If an incorrect PIN is entered for
Page 25 and 26: If an incorrect value is entered, p
Page 27 and 28: 4.2.7 Franking an Envelope Insert t
Page 29 and 30: 5. FRANKING WITH AUTOFEED Used in c
Page 31 and 32: 6. FRANKING LABELS 6.1 Filling the
Page 33 and 34: If during the label printing proces
Page 35 and 36: 7.2 How do I calculate the correct
Page 37 and 38: If you wish to accept the Postage d
Page 39 and 40: * A Pre-loaded slogan can be overwr
Page 41 and 42: Using the and keys, or the appropri
Page 43: 9. MAINTAINING PRINT QUALITY Under
Page 47 and 48: Carefully withdraw the used Ink Car
Page 49 and 50: 10. METER REGISTERS Your franking m
Page 51 and 52: If after a short wait, you are retu
Page 53 and 54: 12. SERVER RECREDITING 12.1 Remote
Page 55 and 56: If for any other reason the re-cred
Page 57 and 58: 13. MEMORY FUNCTIONS Frequently use
Page 59 and 60: 14. SUPERVISOR SETTINGS 14.1 Introd
Page 61 and 62: The following functions may be acce
Page 63 and 64: 14.3.1 Changing the User PIN From t
Page 65 and 66: The following screen will be observ
Page 67 and 68: To change the Department PIN, enter
Page 69 and 70: 7. Default Stamp Value Enables the
Page 71 and 72: To return to the previous screen wi
Page 73 and 74: Default Stamp Value From the SETUP
Page 75 and 76: Using the and keys, or the appropri
Page 77 and 78: 14.6 Memory Cards The following mem
Page 79 and 80: On completion of the downloading pr
Page 81 and 82: If the method of print is set to EX
Page 83 and 84: 15. TROUBLE SHOOTING PROBLEM IJ35/4
Page 85 and 86: 15.1 Clearing a mail jam from the a
Page 87 and 88: IJ-35/45 FRANKING MACHINE USER'S GU
Page 89: 4128500V/C 23/09/2009 IJ35-0023-04

User Guide Product(range) - Neopost

Create successful ePaper yourself

Delete template?

Save as template?