User Guide Product(range) - Neopost
User Guide Product(range) - Neopost
User Guide Product(range) - Neopost
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Telephone Number Change<br />
From the SETUP screen select TELEPHONE SETTINGS and<br />
press to confirm, the following screen will be observed:<br />
TELEPHONE SETTINGS<br />
1 SERVER NO. 09063420342<br />
2 HELPDESK NO. 01708714111<br />
3 REMOTE NO. NONE<br />
4 PREFIX NONE<br />
5 PAUSE 0<br />
ESCAPE<br />
If you are advised of a telephone number change, move the cursor<br />
to the number to be changed (e.g. 1 SERVER NUMBER) and<br />
press to confirm, the following screen will now be observed:<br />
OK<br />
SERVER NO.<br />
ESC<br />
To return to the SETUP menu with the telephone number<br />
unchanged, press .<br />
Or enter the new number using the numeric key pad, then press<br />
to confirm.<br />
Changes to Prefix, Pause, Tone Detect and Dial Delay<br />
Settings<br />
PREFIX If your outside line is routed through a<br />
switchboard, telephone numbers must be prefixed by the<br />
appropriate outside line digit (for most systems this is a 9 or a 0).<br />
PAUSE With some telephone networks it may be<br />
necessary to enter a pause<br />
between the outside line digit and the telephone number.<br />
TONE DETECT You may wish to wait for a dial tone to be<br />
detected before dialling out.<br />
DIAL DELAY You may wish to enter a delay between<br />
dialling attempts (in seconds).<br />
OK<br />
74<br />
Supervisor settings<br />
4128500V/B<br />
01/02/2006<br />
IJ35-0024-74/A
Change language