User Guide Product(range) - Neopost

More documents

Recommendations

Info

Using the and keys, or the appropriate number key, move the cursor to the message you wish to set and press to confirm, the TEXT screen will be observed: TEXT A BCDEFGH I JK LMNOPQRST UVW X Y Z - # & £ / + $ .€ Use the , and keys to move the cursor to the character to be defined. Press and hold keys to scroll cursor. The key is used to confirm the selection and move the cursor to the next character. To delete a character press . To enter numbers in the text use the numeric keypad, you do not need to press the key to confirm selection when entering numbers. A text is limited to two lines of 16 characters including spaces. To return to the previous screen with the text message unchanged press until the screen changes to the previous one. To confirm your entry press . To Change a Text Message, select TEXT as described above. Using the key, delete characters of the old text message. Press as many times as required to erase the message completely, then enter the new message as previously detailed. NEXT 76 Supervisor settings 4128500V/B 01/02/2006 IJ35-0024-76/A
14.6 Memory Cards The following memory cards are currently available from <strong>Neopost</strong> or <strong>Neopost</strong> representative: Message/Slogan Cards (one message per card) Rate Card (when postal rates change) in accordance with P.O. Specification Town Card (if you move to a different postal area) in accordance with P.O. Specification 14.6.1 How To Load Data Using a Memory Card The following example illustrates the loading of a slogan, (remember only 2 customised slogans can be stored in the machine at any one time). 1. From the SUPERVISOR screen select LOAD FROM MEMORY CARD and press to confirm, the following screen will be observed: INSERT CARD ESC Insert the memory card face uppermost into the card reader, on the right hand side of the machine as illustrated: OK 2. Press to confirm. The name of the slogan will now be observed: LOAD FROM MEMORY CARD 1 SLOGAN NAME ESC To return to the previous screen press . OK Supervisor settings 77 4128500V/B 01/02/2006 IJ35-0024-77/A
Page 1 and 2:
WARNING! Do not under any circumsta
Page 3 and 4:
INTRODUCTION Congratulations on cho
Page 5 and 6:
CONTENTS 1. GENERAL SPECIFICATIONS
Page 7 and 8:
11. CLEARING MAIL PATH ............
Page 9 and 10:
1. GENERAL SPECIFICATIONS IJ35 IJ45
Page 11 and 12:
2.2 Franking machine 2.2.1 Attach t
Page 13 and 14:
2.2.5 Machine Connections Weigh Pla
Page 15 and 16:
2.2.6 Position Receiving Tray 2.2.7
Page 17 and 18:
3.2 Machine 1. Display presents a v
Page 19 and 20:
3.2.1 Display Panel Text Message Sl
Page 21 and 22:
4. FRANKING YOUR MAIL 4.1 Introduct
Page 23 and 24:
If an incorrect PIN is entered for
Page 25 and 26: If an incorrect value is entered, p
Page 27 and 28: 4.2.7 Franking an Envelope Insert t
Page 29 and 30: 5. FRANKING WITH AUTOFEED Used in c
Page 31 and 32: 6. FRANKING LABELS 6.1 Filling the
Page 33 and 34: If during the label printing proces
Page 35 and 36: 7.2 How do I calculate the correct
Page 37 and 38: If you wish to accept the Postage d
Page 39 and 40: * A Pre-loaded slogan can be overwr
Page 41 and 42: Using the and keys, or the appropri
Page 43 and 44: 9. MAINTAINING PRINT QUALITY Under
Page 45 and 46: ENTER STRAIGHTEST LINE NO. PRESS 5S
Page 47 and 48: Carefully withdraw the used Ink Car
Page 49 and 50: 10. METER REGISTERS Your franking m
Page 51 and 52: If after a short wait, you are retu
Page 53 and 54: 12. SERVER RECREDITING 12.1 Remote
Page 55 and 56: If for any other reason the re-cred
Page 57 and 58: 13. MEMORY FUNCTIONS Frequently use
Page 59 and 60: 14. SUPERVISOR SETTINGS 14.1 Introd
Page 61 and 62: The following functions may be acce
Page 63 and 64: 14.3.1 Changing the User PIN From t
Page 65 and 66: The following screen will be observ
Page 67 and 68: To change the Department PIN, enter
Page 69 and 70: 7. Default Stamp Value Enables the
Page 71 and 72: To return to the previous screen wi
Page 73 and 74: Default Stamp Value From the SETUP
Page 75: Using the and keys, or the appropri
Page 79 and 80: On completion of the downloading pr
Page 81 and 82: If the method of print is set to EX
Page 83 and 84: 15. TROUBLE SHOOTING PROBLEM IJ35/4
Page 85 and 86: 15.1 Clearing a mail jam from the a
Page 87 and 88: IJ-35/45 FRANKING MACHINE USER'S GU
Page 89: 4128500V/C 23/09/2009 IJ35-0023-04
show all

User Guide Product(range) - Neopost

Create successful ePaper yourself

Delete template?

Save as template?