TOPS Pro Tutorial - TOPS - Packaging Software

New Shape Function – Pinch Bottom
The Pinch Bottom function transforms a section of any shape and gives its
bottom edge a pinched shape. The Pinch Bottom function is useful for
designing tubes of toothpaste, etc. In the figure below the work unit has a
round bottom section.
1. Right-click on the bottom section of the work unit.
System Response: A small menu appears.
2. Select the Shape Function option, then select the Pinch Bottom
function.
System Response: The work unit transforms with a pinched bottom,
as pictured below.
70 TOPS User Guide Supplement and Tutorial