tainy hmod-v3-io, tainy hmod-l3-io - Dr. Neuhaus ...
tainy hmod-v3-io, tainy hmod-l3-io - Dr. Neuhaus ...
tainy hmod-v3-io, tainy hmod-l3-io - Dr. Neuhaus ...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
2 Setup<br />
2.1 Step by step<br />
Set up the TAINY xMOD in the following steps:<br />
Step Chapter<br />
1. First familiarise yourself with the precondit<strong>io</strong>ns for operat<strong>io</strong>n of the<br />
TAINY xMOD.<br />
2. Read the safety instruct<strong>io</strong>ns and other instruct<strong>io</strong>ns at the beginning of<br />
this user manual very carefully, and be sure to follow them.<br />
3. Please familiarise yourself with the control elements, connect<strong>io</strong>ns and<br />
operating state indicators of the TAINY xMOD.<br />
4. Connect a PC with a Web browser (Admin PC) to the local interface<br />
(10/100 BASE-T) of the TAINY xMOD.<br />
5. Using the Web user interface of the TAINY xMOD, enter the PIN<br />
(Personal Identificat<strong>io</strong>n Number of the SIM card.<br />
Setup<br />
TAINY xMOD Page 15 of 111<br />
2.2<br />
2.3 to 2.6<br />
3.3, 3.4<br />
6. Disconnect the TAINY xMOD from the power supply. 2.6<br />
7. Insert the SIM card in the device. 2.7<br />
8. Connect the antenna. 2.6<br />
9. Connect the TAINY xMOD to the power supply. 2.6<br />
10. Set the TAINY xMOD up in accordance with your requirements. 3 to 101<br />
11. Connect your local applicat<strong>io</strong>n. 2.6<br />
5.1