tainy hmod-v3-io, tainy hmod-l3-io - Dr. Neuhaus ...
tainy hmod-v3-io, tainy hmod-l3-io - Dr. Neuhaus ...
tainy hmod-v3-io, tainy hmod-l3-io - Dr. Neuhaus ...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Status, log and diagnosis<br />
Entries in log Column A: Time stamp<br />
9.2 Remote logging<br />
Maintenance ><br />
Remote Logging<br />
Column B: <strong>Dr</strong>. <strong>Neuhaus</strong> product number<br />
Column C: Signal quality (CSQ value)<br />
Column D: GSM login status<br />
STAT = --- = Funct<strong>io</strong>n not activated yet<br />
STAT = 1 = Logged in to home network<br />
STAT = 2 = Not logged in; searching for network<br />
STAT = 3 = Login rejected<br />
STAT = 5 = Logged in to third-party network (roaming)<br />
Column E: Indicat<strong>io</strong>n of the network operator identificat<strong>io</strong>n with the 3-digit<br />
country code (MCC) and the 2-3-digit network operator code<br />
(MNC).<br />
Example: 26201 (262 = country code / 01 = network operator<br />
code)<br />
Column F: Coded operating status (for customer service)<br />
Column G: Category of the log report (for customer service)<br />
Column H: Internal source of the log report (for customer service)<br />
Column I: Internal report number (for customer service)<br />
Column J: Log report in plain text<br />
Columns<br />
K-P:<br />
Addit<strong>io</strong>nal informat<strong>io</strong>n on the plain text report, such as:<br />
- Cell ID (identificat<strong>io</strong>n number of the active GSM cell)<br />
- Software vers<strong>io</strong>n<br />
- TXS, RXS (IP packets transmitted in the current connect<strong>io</strong>n)<br />
- TX, RX (IP packets transmitted since the last factory settings<br />
reboot)<br />
Page 82 of 111 TAINY xMOD
Change language