tainy hmod-v3-io, tainy hmod-l3-io - Dr. Neuhaus ...

Function Access to the TAINY xMOD is protected by an access password. This
access password protects access by way of both the
Access password
(factory setting)
New
access password
(with confirmation)
3.9 Reboot
Maintenance >
Reboot
� local interface to the Web user interface, and
� local interface to the SSH console,
Configuration
as well as the access to the available wireless connection (HDSPA, UMTS,
EGPRS or GPRS)
� UMTS/GPRS by https to the Web user interface, and
� UMTS/GPRS to the SSH console
The factory setting for the TAINY xMOD is:
� Password: root
� User name: root (cannot be changed)
Note
Please change the password immediately after initial start-up. The factory
setting is general knowledge and does not provide sufficient protection.
To change the password, enter the new password you have selected in New
access password and confirm the entry in Retype new access password.
Reset can be used to discard any entries that have not yet been saved.
Save accepts the new password.
Function Although the TAINY xMOD is designed for continuous operation, in such a
complex system faults may occur, often triggered by external influences. A
reboot can rectify these faults.
The reboot resets the functions of the TAINY xMOD. Current settings
according to the configuration profile do not change. The TAINY xMOD
continues to work using these settings after the reboot.
Reboot now The reboot is carried out immediately when you click on Reboot.
Enable daily reboot The reboot is carried out automatically once a day if you switch the function
on with Yes.
Factory setting
Specify the Time of the daily reboot. The reboot will be carried out at the
specified system time. Existing connections will be interrupted.
Enable daily reboot: No
Reboot time 01:00
TAINY xMOD Page 35 of 111