tainy hmod-v3-io, tainy hmod-l3-io - Dr. Neuhaus ...
tainy hmod-v3-io, tainy hmod-l3-io - Dr. Neuhaus ...
tainy hmod-v3-io, tainy hmod-l3-io - Dr. Neuhaus ...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Preferred DNS server<br />
Configurat<strong>io</strong>n<br />
If you call up addresses via a domain name (e.g. www.neuhaus.de), then<br />
you must refer to a domain name server (DNS) to find out what IP address is<br />
behind the name. You can define the following as the domain name server:<br />
� The DNS address of the network operator,<br />
or<br />
� The local IP address of the TAINY xMOD, as long as it is configured<br />
for breaking out host names into IP addresses<br />
(see Chapter 4.3). This is the factory setting.<br />
To define the domain name server in the TCP/IP configurat<strong>io</strong>n of your<br />
network adapter, proceed as described above.<br />
3.4 Establishing a configurat<strong>io</strong>n connect<strong>io</strong>n<br />
Setting up a Web<br />
browser<br />
Calling up the<br />
start page of the TAINY<br />
xMOD<br />
Confirming the security<br />
message<br />
Proceed as follows:<br />
1. Launch a Web browser.<br />
(e.g. MS Internet Explorer Vers<strong>io</strong>n 7 or later or Mozilla Firefox Vers<strong>io</strong>n 2<br />
or later; the Web browser must support SSL (i.e. HTTPS).)<br />
2. Make sure that the browser does not automatically dial a connect<strong>io</strong>n<br />
when it is launched.<br />
In MS Internet Explorer 7, make this setting as follows: Menu Tools,<br />
Internet Opt<strong>io</strong>ns..., tab Connect<strong>io</strong>ns: The opt<strong>io</strong>n Do not select a<br />
connect<strong>io</strong>n must be activated.<br />
3. In the address line of the browser, enter the address of the TAINY xMOD<br />
in full. In the factory settings this is:<br />
https://192.168.1.1<br />
Result: A security message appears. In Internet Explorer 7, for example,<br />
this one:<br />
4. Acknowledge the corresponding safety message with "Continue loading<br />
this page …"<br />
TAINY xMOD Page 27 of 111