tainy hmod-v3-io, tainy hmod-l3-io - Dr. Neuhaus ...

VPN connections
Password The certificate file (PKCS12 file) is password-protected. Here enter the
password that you received with the certificate file.
Remote certificates
(.crt)
Device certificates
(.p12)
7.5 Firewall rules for VPN tunnel
Firewall rules for
VPN tunnel
ONLY TAINY HMOD-V3-IO
ONLY TAINY EMOD-V3-IO
IPsec VPN – Edit
Firewall Rules
A list with all of the loaded remote certificates is shown here. You can use
Delete to remove a remote certificates that is no longer needed.
The name and status of the loaded certificate file (PKCS12 file) is shown
here.
The corresponding component of the certificate file is present
The corresponding component is missing or that the wrong password
was entered.
The user interface for setting up the firewall rules for VPN tunnels can be
found under IPsec VPN > Connections:
Function The IPsec VPN connection is viewed as fundamentally secure. Thus data
traffic over this connection is not limited by default. It is possible, however, to
create firewall rules for the VPN connection
To set up firewall rules for the VPN connection, proceed in the same way as
for setting up the packet filter function of the general firewall (see Chapter
6.1). However, the rules defined here apply only to the specific VPN
connection.
Factory setting The factory settings used by the TAINY xMOD-V3-IO for a newly created
connection are as follows:
Firewall rules for VPN tunnel No limitations
Page 72 of 111 TAINY xMOD