tainy hmod-v3-io, tainy hmod-l3-io - Dr. Neuhaus ...
tainy hmod-v3-io, tainy hmod-l3-io - Dr. Neuhaus ...
tainy hmod-v3-io, tainy hmod-l3-io - Dr. Neuhaus ...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Addit<strong>io</strong>nal funct<strong>io</strong>ns<br />
Enable SMS messaging<br />
from the local network<br />
Username<br />
Password<br />
Port number<br />
Firewall Rules<br />
Seq-Num<br />
The sequence number is used to distinguish several SMS tx jobs in parallel.<br />
The funct<strong>io</strong>n is not supported yet.<br />
The sequence number consists of 2 numeric characters between 01 and 99<br />
Phonenumber<br />
GSM telephone number of the SMS recipient. The GSM telephone number<br />
may not exceed 40 characters. Internat<strong>io</strong>nal numbers (+49..) can be<br />
entered.<br />
Text<br />
SMS Text. The text may not exceed 160 characters. The following<br />
characters are available: A-Z a-z 0123456789,!?<br />
The following characters are reserved and may not appear in the SMS text<br />
(forbidden characters):<br />
# Separator of the first command level<br />
; Separator of the second command level<br />
: End of message indicator<br />
Click Yes to be able to send SMS from the local network.<br />
Username, which has to be part of the message frame, which text shall be<br />
transmitted by SMS. 10 characters maximum.<br />
Password, which has to be part of the message frame, which text shall be<br />
transmitted by SMS. 10 characters maximum.<br />
Number of the TCP/IP port at which the TAINY xMOD accepts the TCP/IP<br />
connect<strong>io</strong>n for SMS messaging.<br />
A firewall rule has to be established to allow the TCP/IP connect<strong>io</strong>n for SMS<br />
messaging to the TAINY xMOD. Click New to enter several sources (From<br />
IP) for TCP/IP connect<strong>io</strong>ns for SMS messaging. Click Delete to remove<br />
connect<strong>io</strong>ns.<br />
From IP<br />
Enter the IP address of the local applicat<strong>io</strong>n that is allowed to send IP<br />
packets to the external network. Do this by specifying the IP address or an<br />
IP range for the local applicat<strong>io</strong>n. 0.0.0.0/0 means all addresses.<br />
To specify a range, use the CIDR notat<strong>io</strong>n - see the Glossary.<br />
Act<strong>io</strong>n<br />
Select accept to allow the TCP/IP connect<strong>io</strong>n for SMS messaging.<br />
Log<br />
For each individual firewall rule you can define whether the event should be<br />
logged when the rule takes effect - set Log to Yes<br />
or not - set Log to No (factory setting)<br />
The log is kept in the firewall log, see Chapter 6.4.<br />
Factory setting The factory settings for the TAINY xMOD are as follows:<br />
User name User<br />
Password Password<br />
Page 88 of 111 TAINY xMOD