tainy hmod-v3-io, tainy hmod-l3-io - Dr. Neuhaus ...
tainy hmod-v3-io, tainy hmod-l3-io - Dr. Neuhaus ...
tainy hmod-v3-io, tainy hmod-l3-io - Dr. Neuhaus ...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Poll interval<br />
Serve system time to<br />
local network<br />
Local interface<br />
The time synchronizat<strong>io</strong>n is carried out cyclically. The interval at which<br />
synchronizat<strong>io</strong>n is performed is determined by the TAINY xMOD<br />
automatically. A new synchronisat<strong>io</strong>n will be carried out at least once every<br />
36 hours. The poll interval defines the minimum per<strong>io</strong>d that the TAINY<br />
xMOD waits until the next synchronizat<strong>io</strong>n.<br />
Note<br />
Synchronising the system time via NTP causes addit<strong>io</strong>nal data traffic on the<br />
wireless data connect<strong>io</strong>n. Depending on the selected settings, the addit<strong>io</strong>nal<br />
data traffic can amount to 120 Kbyte per month or more. This entails higher<br />
costs, depending on the participant contract with the GSM network operator.<br />
The TAINY xMOD can serve itself as an NTP time server for the applicat<strong>io</strong>ns<br />
that are connected to its local network interface. To activate this funct<strong>io</strong>n<br />
select Yes.<br />
The NTP time server in the TAINY xMOD can be reached via the local IP<br />
address set for the TAINY xMOD, see Chapter 4.1.<br />
Factory setting The factory settings for the TAINY xMOD are as follows:<br />
4.6 Addit<strong>io</strong>nal Internal Routes<br />
Local Network ><br />
Advanced Settings ><br />
Addit<strong>io</strong>nal Internal<br />
Routes<br />
Local timezone UTC<br />
Activate NTP synchronizat<strong>io</strong>n No<br />
NTP server 192.53.103.108<br />
Poll interval 1.1 hours<br />
Serve system time to local network No<br />
Funct<strong>io</strong>n If the local network is subdivided into subnetworks, you can defines<br />
addit<strong>io</strong>nal routes.<br />
See also Chapter 11.<br />
To define an addit<strong>io</strong>nal route to a subnetwork, click on New.<br />
Specify the following:<br />
- the IP address of the subnetwork (network), and also<br />
- the IP address of the gateway via which the subnet is connected.<br />
You can define any desired number of internal routes.<br />
To delete an internal route, click on Delete.<br />
Factory setting The factory settings for the TAINY xMOD are as follows:<br />
Addit<strong>io</strong>nal Internal Routes -<br />
Default for new routes:<br />
Network: 192.168.2.0/24<br />
Gateway: 192.168.0.254<br />
TAINY xMOD Page 41 of 111