tainy hmod-v3-io, tainy hmod-l3-io - Dr. Neuhaus ...
tainy hmod-v3-io, tainy hmod-l3-io - Dr. Neuhaus ...
tainy hmod-v3-io, tainy hmod-l3-io - Dr. Neuhaus ...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Remote access<br />
Approved Call Numbers Specify the call number of the telephone connect<strong>io</strong>n from which the dial-in<br />
data connect<strong>io</strong>n is established. The telephone connect<strong>io</strong>n must support<br />
Calling Line Identificat<strong>io</strong>n Presentat<strong>io</strong>n (CLIP), and this funct<strong>io</strong>n must be<br />
activated.<br />
The call number entered in the TAINY xMOD must be exactly the same as<br />
the call number reported, any may also have to include the country code and<br />
prefix, e.g. +494012345678.<br />
If multiple call numbers of a private branch exchange are to have access<br />
authorisat<strong>io</strong>n, you can use the "*" symbol as a wildcard, e.g. +49401234*.<br />
Then all call numbers that begin with +49401234 will be accepted.<br />
Note<br />
Firewall rules entered for HTTPS and SSH access also apply for CSD<br />
access. The source IP address ("From IP") for CSD access is defined as<br />
10.99.99.2.<br />
New Adds a new approved call number for CSD remote access that<br />
you can then fill out.<br />
Delete Removes a firewall rule for CSD remote access.<br />
Factory setting The factory settings for the TAINY xMOD are as follows:<br />
Enable CSD dial-in No (switched off)<br />
PPP username service<br />
PPP password service<br />
Approved Call Numbers *<br />
Page 80 of 111 TAINY xMOD