tainy hmod-v3-io, tainy hmod-l3-io - Dr. Neuhaus ...
tainy hmod-v3-io, tainy hmod-l3-io - Dr. Neuhaus ...
tainy hmod-v3-io, tainy hmod-l3-io - Dr. Neuhaus ...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
The start page is not<br />
displayed<br />
If after several tries the browser still reports that the page cannot be<br />
displayed, try the following:<br />
Configurat<strong>io</strong>n<br />
� Check the hardware connect<strong>io</strong>n. On a Windows computer, go to the<br />
DOS prompt (Menu Start, Programs, Accessories, Command Prompt)<br />
and enter the following command:<br />
ping 192.168.1.1<br />
If a return receipt message for the 4 packets that were sent out does<br />
not appear within the specified time per<strong>io</strong>d, please check the cable,<br />
the connect<strong>io</strong>ns and the network card.<br />
� Make sure that the browser does not use a proxy server. In MS<br />
Internet Explorer (Vers<strong>io</strong>n 7.0), make this setting as follows: Menu<br />
Tools, Internet Opt<strong>io</strong>ns..., tab Connect<strong>io</strong>ns: Under LAN Settings, click<br />
on the Settings... button, then in the dialog box Settings for local<br />
network (LAN), make sure that under Proxy Server the entry Use proxy<br />
server for LAN is not activated.<br />
� If other LAN connect<strong>io</strong>ns are active on the computer, deactivate them<br />
for the durat<strong>io</strong>n of the configurat<strong>io</strong>n process.<br />
Under the Windows menu Start, Connect To ..., Show All<br />
Connect<strong>io</strong>ns… , under LAN or High-Speed Internet right-click on the<br />
connect<strong>io</strong>n concerned and select Deactivate in the pop-up menu.<br />
� Enter the address of the TAINY xMOD with a slash:<br />
https://192.168.1.1/<br />
TAINY xMOD Page 29 of 111