tainy hmod-v3-io, tainy hmod-l3-io - Dr. Neuhaus ...
tainy hmod-v3-io, tainy hmod-l3-io - Dr. Neuhaus ...
tainy hmod-v3-io, tainy hmod-l3-io - Dr. Neuhaus ...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Signal (CSQ Level) Indicates the strength of the GSM signal as a CSQ value and (in<br />
parentheses) as an RSSI value in dBm.<br />
� CSQ < 6: Poor signal strength<br />
� CSQ= 6..10: Medium signal strength<br />
� CSQ=11-18: Good signal strength<br />
� CSQ > 18: Very good signal strength<br />
� CSQ = 99: No connect<strong>io</strong>n to the mobile network<br />
Configurat<strong>io</strong>n<br />
Used APN Shows the APN (= Access Point Name) used for the mobile data service.<br />
IMSI Shows the participant recognit<strong>io</strong>n, which is stored on the SIM card in use.<br />
The GSM network operator recognises the SIM card’s authorisat<strong>io</strong>ns and<br />
agreed services based on the IMSI (= Internat<strong>io</strong>nal Mobile Subscriber<br />
Identity).<br />
NTP synchronizat<strong>io</strong>n Shows whether the NTP synchronizat<strong>io</strong>n is activated<br />
NTP synchronizat<strong>io</strong>n activated.<br />
NTP synchronizat<strong>io</strong>n not activated.<br />
DynDNS Shows whether a DynDNS service is activated<br />
DynDNS service activated.<br />
DynDNS service not activated<br />
Remote HTTPS Shows whether remote access to the Web user interface of the TAINY<br />
xMOD via mobile rad<strong>io</strong> network is permitted (see Chapter 8.1).<br />
Access using HTTPS is allowed.<br />
Access using HTTPS is not allowed.<br />
Remote SSH Shows whether remote access to the SSH console of the TAINY HMOD-V3-<br />
IO via mobile rad<strong>io</strong> network is permitted (see Chapter 8.2).<br />
CSD Dial-In<br />
ONLY TAINY EMOD<br />
Access using SSH is allowed.<br />
Access using SSH is not allowed.<br />
Shows whether remote CSD service calls are allowed (see Chapter 8.3).<br />
� White hook on red point: CSD service calls are possible.<br />
� White cross on red point: CSD service calls are not possible.<br />
SNMP Shows whether the setting and reading of parameters via SNMP is enabled<br />
(see chapter 11.111):<br />
Setting/reading of parameters via SNMP is allowed.<br />
Setting/reading of parameters via SNMP is not allowed.<br />
SNMP Trap Shows whether the sending of SNMP messages (SNMP traps) is enabled<br />
(see chapter 11.2):<br />
Sending of SNMP messages activated.<br />
TAINY xMOD Page 31 of 111
Change language