tainy hmod-v3-io, tainy hmod-l3-io - Dr. Neuhaus ...

More documents

Recommendations

Info

External interface Change PIN Press the Change button to change the PIN on the SIM card. A submenu opens. New PIN Enter the new PIN here. New PIN (repeated) Enter the new PIN again to confirm. Provider (only in case of provider selection mode Automatic) Net-ID (only in case of provider selection mode Automatic) Note If the PIN query is deactivated with the SIM card inserted (PIN-less card), then the PIN cannot be activated or changed. Enter as free text the description of the UMTS or GPRS service, e.g. the Provider name (e.g. Vodafone, Eplus, my GPRS access). Enter the identification number of the network provider to which the UMTS or GPRS access data of the same line of the provider list are related to. Each UMTS or GSM/GPRS network has a worldwide unique identification number. This number is stored on the SIM card. The TAINY xMOD reads this Net-ID from the SIM card and selects the corresponding GPRS access data from the provider list. You find the NET-ID at our Web site www.neuhaus.de, in the information documents of your UMTS or GSM/GPRS provider, at his homepage or you can ask the hotline of the provider (keyword: MCC/MNC). User name Enter the user name for the UMTS/GPRS here. Some mobile radio network operators do not use access control with user names and/or passwords. In this case enter guest in the corresponding box. Password Enter the password for UMTS/GPRS here. Some mobile radio network operators do not use access control with user names and/or passwords. In this case enter guest in the corresponding box. APN Enter the name of the transition from UMTS/GPRS to other networks here. Method of provider Authentication You can find the APN in your mobile radio network operator's documentation, on your operator's Website, or ask your operator's hotline. For registration at the wireless data service (HSPA+, UMTS, EGPRS or GPRS), two different methods (PAP and CHAP) are used. In general, the selection of the method is performed automatically. If a particular method shall be used, the selection may be done manually. Choose from Auto, PAP or CHAP. Factory setting The factory settings for the TAINY xMOD are as follows: Only TAINY HMOD-V3-IO Network selection UMTS or GSM Provider selection mode - Manual Mode of provider selection Automatic Roaming No PIN NONE Username guest Password guest Page 44 of 111 TAINY xMOD
Provider selection mode - Automatic APN NONE 1. Provider T-Mobile Net-ID 26201 Username guest Password guest APN internet.t-mobile 2. Provider Vodafone Net-ID 26202 Username guest Password guest APN web.vodafone.de 3. Provider Eplus Net-ID 26203 Username guest Password guest APN internet.eplus.de 4. Provider O2 Net-ID 26207 Username guest Password guest APN internet n. Provider NONE Net-ID NONE Username NONE Password NONE APN NONE Method of provider authentication Auto Allow Roaming No External interface TAINY xMOD Page 45 of 111
Page 1 and 2: User Manual TAINY HMOD-V3-IO, TAINY
Page 3 and 4: Products ! Safety instructions The
Page 5 and 6: Firmware with open source GPL/LGPL
Page 7 and 8: Contents Contents 1 Introduction ..
Page 9 and 10: 1 Introduction Introduction Product
Page 11 and 12: Introduction Local applications cou
Page 13 and 14: Terms Here are definitions of terms
Page 15 and 16: 2 Setup 2.1 Step by step Set up the
Page 17 and 18: 2.3 Overview 2.4 Service button Set
Page 19 and 20: TAINY EMOD Lamp Status Meaning S (S
Page 21 and 22: 2.6 Connections LAN0, LAN1 (10/100
Page 23 and 24: 24V / 0V power supply The TAINY xMO
Page 25 and 26: 3 Configuration 3.1 Overview Remote
Page 27 and 28: Preferred DNS server Configuration
Page 29 and 30: The start page is not displayed If
Page 31 and 32: Signal (CSQ Level) Indicates the st
Page 33 and 34: Carrying out configuration ONLY TAI
Page 35 and 36: Function Access to the TAINY xMOD i
Page 37 and 38: 4 Local interface 4.1 IP addresses
Page 39 and 40: 4.3 DNS to local network Local Netw
Page 41 and 42: Poll interval Serve system time to
Page 43: Provider selection mode - Manual Pr
Page 47 and 48: Activity on faulty connection Renew
Page 49 and 50: Remote host 0.0.0.0 Group group Use
Page 51 and 52: 5.7 Volume supervision External net
Page 53 and 54: Security functions Protocol Select
Page 55 and 56: 6.2 Port Forwarding Security > Port
Page 57 and 58: 6.4 Firewall Log Security > Firewal
Page 59 and 60: Requirements for the remote network
Page 61 and 62: VPN connections CA certificate The
Page 63 and 64: VPN connections ISAKMP-SA mode Agre
Page 65 and 66: VPN Standard Mode Edit Settings Con
Page 67 and 68: VPN connections Remote net address
Page 69 and 70: VPN Standard Mode Edit IKE VPN conn
Page 71 and 72: 7.4 Loading VPN certificates IPsec
Page 73 and 74: 7.6 Supervision of VPN connections
Page 75 and 76: Number of connect attempts until re
Page 77 and 78: Action Define how access to the spe
Page 79 and 80: Factory setting The factory setting
Page 81 and 82: 9 Status, log and diagnosis 9.1 Log
Page 83 and 84: Status, log and diagnosis Function
Page 85 and 86: Status, log and diagnosis Function
Page 87 and 88: Additional functions Text Here ente
Page 89 and 90: Port number 26864 Firewall Rules No
Page 91 and 92: The following parameters of the TAI
Page 93 and 94: Target host NONE Target port 162 Ta
Page 95 and 96:
Asymmetric encryption CIDR Small le
Page 97 and 98:
Small lexicon of routers CSQ / RSSI
Page 99 and 100:
Small lexicon of routers EGPRS EGPR
Page 101 and 102:
IPsec MIB See SNMP Small lexicon of
Page 103 and 104:
Protocol, Transfer protocol Small l
Page 105 and 106:
X.509 certificate A type of "seal"
Page 107 and 108:
Network B Computer B1 B2 B3 B4 Addi
Page 109 and 110:
Conformity CE Conforms to Directive
Page 111:
Protection class IP20 Dimensions 11
show all

tainy hmod-v3-io, tainy hmod-l3-io - Dr. Neuhaus ...

Create successful ePaper yourself

Delete template?

Save as template?