tainy hmod-v3-io, tainy hmod-l3-io - Dr. Neuhaus ...

Security functions
Firewall Rules
Incoming / Outgoing
Log Unknown
Connection Attempts
To port Enter the port to which the external local application is allowed to
send IP packets. Do this by specifying the port number.
(is only evaluated for the protocols TCP and UDP)
Action Select how outgoing IP packets are to be handled:
Accept – The data packets can go through,
Reject – The data packets are rejected, and the sender receives
a corresponding message.
Drop – The data packets are discarded without any feedback to
the sender.
Log For each individual firewall rule you can define whether the event
should be
� logged when the rule takes effect - set Log to Yes
� or not - set Log to No (factory setting)
The log is kept in the firewall log, see Chapter 6.4.
This logs all connection attempts that are not covered by the defined rules.
Factory setting The factory settings for the TAINY xMOD are as follows:
Incoming firewall Firewall Rules (Incoming) - (Everything blocked)
Protocol All
From IP 0.0.0.0/0
From port Any
To IP 0.0.0.0/0
To port Any
Action Accept
Log No (switched off)
Log Unknown Connection Attempts No (switched off)
Outgoing firewall Firewall Rules (Outgoing) - (Everything blocked)
Protocol All
From IP 0.0.0.0/0
From port Any
To IP 0.0.0.0/0
To port Any
Action Accept
Log No (switched off)
Log Unknown Connection Attempts No (switched off)
Page 54 of 111 TAINY xMOD