tainy hmod-v3-io, tainy hmod-l3-io - Dr. Neuhaus ...

Carrying out
configuration
ONLY TAINY HMOD-V3-IO
ONLY TAINY EMOD-V3-IO
1. Use the menu to call up the
desired settings area
2. Make the desired entries on the
page concerned or use Reset to
delete the current entry which has
not been saved.
3. Use Save to confirm the entries so
that they are accepted by the
device.
Note regarding the scope of function
Configuration
The menu item IPsec-VPN is only present for the TAINY HMOD-V3-IO and
TAINY EMOD-V3-IO.
� Depending on how you configure the TAINY xMOD, you may then have
to adapt the network interface of the locally connected computer or
network accordingly.
� When entering IP addresses, always enter the IP address component
numbers without leading zeros, e.g.: 192.168.0.8.
Invalid entries The TAINY xMOD checks your entries. Obvious errors are detected during
saving and the input box in question is marked. The entered value is reset to
the default value.
3.7 Configuration Profiles
Maintenance >
Configurations
Profiles
Function The settings of the TAINY xMOD can be saved in configuration profiles
(files) and re-loaded at any time.
Upload Profile Loads to the TAINY xMOD a configuration profile that was created before
and saved on the Admin PC. Files with configuration profiles have the file
extension *.tgz.
Browse can be used to search the Admin PC for configuration profiles,
Submit loads the configuration profile to the TAINY xMOD.
It will then be shown in the table of saved configuration profiles.
TAINY xMOD Page 33 of 111