tainy hmod-v3-io, tainy hmod-l3-io - Dr. Neuhaus ...

5.7 Volume supervision
External network –
Volume monitoring
Enable Traffic Volume
Supervision
Current monthly byte
count
External interface
Considerable additional costs may be incurred if the amount of data sent and
received by the TAINY xMOD exceeds the data volume agreed upon with
the wireless network operator.
Therefore, it may be beneficial if the data volume the TAINY xMOD uses is
monitored and a warning is issued when a variable limit value is approached.
Select Yes in order to switch on the traffic volume supervision.
Select No in order to switch off the traffic volume supervision.
Shows the number of bytes sent and received since the beginning of the
month.
Note
Manually set the system time of the TAINY xMOD or activate the NTP
synchronization, see chapter 4.5.
Reset Press the button if you want to reset the counter for the bytes sent and
received to 0.
Maximum bytes per
month
Warning SMS on
exceeding the volume
limit (80%)
Alarm SMS on
exceeding the volume
limit (100%)
This takes place automatically at the end of the month.
Enter the limit value for the monthly data volume in bytes here.
Select Yes if you want the TAINY xMOD to send an SMS with a warning
message to the specified call number upon reaching 80% of the maximum
data volume.
Select Yes if you want the TAINY xMOD to send an SMS with an alert
message to the specified call number upon reaching the maximum data
volume.
Call number Enter the mobile call number which the SMS with the alarm or warning
message should be sent to here.
Text Enter the text of the alarm or warning SMS here.
Note
The data volume detected only serves as an indication and may deviate from
the calculation of the GSM network operator.
TAINY xMOD Page 51 of 111