tainy hmod-v3-io, tainy hmod-l3-io - Dr. Neuhaus ...

Action Define how access to the specified HTTPS port will be
handled:
Accept means that the data packets can go through.
Reject means that the data packets are rejected, and the
sender receives a message about the rejection.
Remote access
Drop means that the data packets are not allowed through.
They are discarded without the sender receiving any
information about where they went.
Log For each individual firewall rule you can define whether the
event should be logged when the rule takes effect - set Log to
Yes,
or not - set Log to No (factory setting).
The log is kept in the firewall log, see Chapter 6.4.
Factory setting The factory settings for the TAINY xMOD are as follows:
8.2 Remote access – SSH
Access > SSH
Enable HTTPS remote access No (switched off)
HTTPS remote access port 443
Default for new rules:
From IP (External) 0.0.0.0/0
Action Accept
Log No (switched off)
Function The SSH remote access (= Secured SHell) allows secure access to the file
system of the TAINY xMOD from an external network via HSPA+, UMTS,
EGPRS, GPRS or CSD.
Enable SSH remote
access
To do this, a connection must be established using an SSH-capable
program from the external remote station to the TAINY xMOD.
Use the SSH remote access only if you are familiar with the LINUX file
system.
In the factory setting this option is deactivated.
Warning
Via SSH remote access it is possible to derange the configuration of the
device in such a way that it will have to be sent in for servicing. In this case
please contact your dealer or distributor.
Yes Access to the file system of the TAINY xMOD from the external
network via SSH is allowed.
No Access via SSH is not allowed.
TAINY xMOD Page 77 of 111