8b7PW0

SeatsInstalling the Head RestraintAlign the steel stems into the guide sleevesand push the head restraint down until itlocks.Folding the Head RestraintNote: The rear seat outboard headrestraints may fold forward for improvedvisibility.1. Press and hold button E.2. Pull it back up to reset.Installing the Head RestraintAlign the steel stems into the guide sleevesand push the head restraint down until itlocks.Tilting Head Restraints (If Equipped)The front head restraints may have a tiltingfeature for extra comfort. To tilt the headrestraint, do the following:Front Seat Center Head RestraintYour vehicle may be equipped with a frontrow center head restraint that isnon-adjustable. This head restraintconsists of:ABE162872ABCCAn energy absorbing headrestraint.Two steel stems.Guide sleeve unlock and removebutton.Removing the Head Restraint1. Pull up the head restraint until itreaches the highest adjustmentposition.2. Press and hold buttons C.3. Pull up the head restraint.E1447271. Adjust the seatback to an uprightdriving or riding position.2. Pivot the head restraint forward towardyour head to the desired position.After the head restraint reaches theforward-most tilt position, pivot it forwardagain to release it to the rearward, un-tiltedposition.Note: Do not attempt to force the headrestraint backward after it is tilted. Instead,continue tilting it forward until the headrestraint releases to the upright position.MANUAL SEATSWARNINGDo not adjust the driver's seat orseatback when your vehicle ismoving.116F150 (TF6) , enUSA