8b7PW0

Universal Garage Door Opener (If Equipped)The system includes two primary features,a garage door opener and a platform forremote activation of devices within thehome. This functionality allows you toprogram garage door openers as well assecurity devices and home lightingsystems.You can find additional system informationonline at www.learcar2U.com or by callingthe toll-free help line on 1-866-572-2728.Note: If you cannot locate the learn button,see the Owner’s Manual for your garagedoor opener or call the toll-free help line at1-866-572-2728.3. Press the learn button on the garagedoor opener motor.E142659E164776Rolling Code ProgrammingNote: If you do not follow the time-sensitiveinstructions, the device will time out andyou will have to repeat the completeprocedure.Note: It may be helpful to have anotherperson assist you in programming thetransmitter.1. Switch the ignition on.2. Press and hold the outer two buttons for1–2 seconds, then release.E164777Note: You may need a ladder to reach theunit and you may need to remove the coveror lamp lens.Note: You will have 10–30 seconds tocomplete the following steps.4. Return to your car.5. Press and hold the function button youwould like to use to control the garagedoor. You may need to hold the buttonfrom 5–20 seconds, during which time theselected button LED lamp will flash slowly.E1647766. When the garage door moves, releasethe button within one second. The LEDlamp will flash rapidly until programmingis complete.7. Press and release the button again. Thegarage door should move, confirming thatprogramming is successful. If your garagedoor does not operate, repeat the previoussteps.The LED lamp above the selected buttonwill illuminate to confirm that the systemis responding to the button command.125F150 (TF6) , enUSA