8b7PW0

Capacities and Specifications1Ford recommends using Motorcraft (Ford) DOT 4 LV High Performance Motor VehicleBrake Fluid or equivalent meeting WSS-M6C65-A2. Use of any fluid other than therecommended fluid may cause degraded brake performance and not meet the Fordperformance standards. Keep brake fluid clean and dry. Contamination with dirt, water,petroleum products or other materials may result in brake system damage and possiblefailure.2The design of your engine allows for the use of Motorcraft engine oils or equivalent oilsthat meet Ford specifications. It is also acceptable to use an engine oil of recommendedviscosity grade that meets API SN requirements and displays the API certification markfor gasoline engines.3Do not use supplemental engine oil additives in your engine. They are unnecessary andcould lead to engine damage not covered by your Ford warranty.Do not use API S category oils labeled as SN, SM, SL or lower category unless the labelalso displays the API certification mark. These oils do not meet the requirements of theengine and emission system.4Add the coolant type originally equipped in your vehicle.5Service refill capacity is determined by filling the axle to 1/4-9/16 inch (6-14 millimeter)below the bottom of the filler hole with the vehicle on a level surface. Add 4 fl oz. (118milliliters) of Additive Friction Modifier XL-3 (US) / CXL-3 (Canada) or equivalent meetingFord specification EST-M2C118-A, for complete fill of 8.8-inch Traction-Lok axles.6Filled with a synthetic rear axle lubricant, consider the rear axle on your vehicle filled forlife. You do not need to check or change the rear axle lubricant unless you suspect a leak.Change the rear axle lubricant any time you have submerged the rear axle in water.7Service refill capacity is determined by filling the transfer case to the bottom of the fillerhole with the vehicle on a level surface.8Make sure the correct automatic transmission fluid is used. Transmission fluidrequirements are indicated on the dipstick blade or the dipstick handle. Before adding,check the container to verify the fluid is of the correct type. Refer to your scheduledmaintenance information to determine the correct service interval.Note: Automatic transmissions that require MERCON LV should only use MERCON LV fluid.Use of any fluid other than the recommended fluid may cause transmission damage.9Indicates only approximate dry-fill capacity. Some applications may vary based on coolersize and if equipped with an in-tank cooler. Use the indication on the dipstick, showingthe normal operating range, to determine the amount of transmission fluid and the fluidlevel.10See the Warning below:WARNINGThe air conditioning refrigerant system contains refrigerant R-134a under highpressure. Opening the air conditioning refrigerant system can cause personal injury.Have the air conditioning refrigerant system serviced only by qualified personnel.305F150 (TF6) , enUSA