8b7PW0

Safety BeltsIf...The driver and front passenger safety beltis buckled before the ignition switch isturned to the on position or less than 1-2minutes have elapsed since the ignitionswitch has been turned to on...Then...The Belt-Minder feature will not activate.The driver or front passenger safety belt isnot buckled when the vehicle has reachedat least 6 mph (9.7 km/h) and 1-2 minuteshave elapsed since the ignition switch hasbeen turned to on...The driver or front passenger safety beltbecomes unbuckled for about one minutewhile the vehicle is traveling at least 6 mph(9.7 km/h) and more than 1-2 minutes haveelapsed since the ignition switch has beenturned to on...The Belt-Minder feature is activated - thesafety belt warning light illuminates andthe warning chime sounds for six secondsevery 25 seconds, repeating for about fiveminutes or until the safety belts arebuckled.The Belt-Minder feature is activated - thesafety belt warning light illuminates andthe warning chime sounds for six secondsevery 25 seconds, repeating for about fiveminutes or until the safety belts arebuckled.Deactivating and Activating theBelt-Minder FeatureWARNINGWhile the system allows you todeactivate it, this system is designedto improve your chances of beingsafely belted and surviving an accident.We recommend you leave the systemactivated for yourself and others who mayuse the vehicle. To reduce the risk of injury,do not deactivate or activate the systemwhile driving the vehicle.Note: The driver and front passengerBelt-Minder are deactivated and activatedindependently. When deactivating oractivating one seating position, do notbuckle the other position, as this willterminate the process.Note: If you are using MyKey, you cannotdisable the Belt-Minder. Also, if theBelt-Minder has been previously disabled,it will be re-enabled during the use ofMyKey. See MyKey (page 53).Read Steps 1 - 4 thoroughly beforeproceeding with the programmingprocedure.Before following the procedure, make surethat:• The parking brake is set.• The transmission is in park (P).• The ignition is off.• The driver and front passenger safetybelt is unbuckled.1. Turn the ignition on. Do not start theengine.2. Wait until the safety belt warning lightturns off (about one minute). Step 3must be completed within 30 secondsafter the safety belt warning light turnsoff.36F150 (TF6) , enUSA