8b7PW0

Universal Garage Door Opener (If Equipped)In-vehicle ProgrammingThis process is to program your hand-heldtransmitter and your in-vehicle HomeLinkbutton.Note: Put a new battery in the hand-heldtransmitter. This will ensure quicker trainingand accurate transmission of theradio-frequency signal.E1426581. With your vehicle parked outside of thegarage, turn your ignition to the onposition, but do not start your vehicle.2. Hold your hand-held garage doortransmitter 1–3 inches (2–8centimeters) away from the HomeLinkbutton that you want to program.3. Using both hands, simultaneously,press and hold the desired HomeLinkbutton and the hand-held transmitterbutton. DO NOT release either one untilthe HomeLink indicator light flashesslowly and then rapidly. When theindicator light flashes rapidly, you canrelease both buttons. The rapidflashing indicates successful training.4. Press and hold the HomeLink buttonyou programmed for five seconds, thenrelease. You may need to do this twiceto activate the door. If your garage doordoes not operate, watch the HomeLinkindicator light.If the indicator light stays on, theprogramming is complete. SeeProgramming Your Garage Door Motorlater in this section.If the indicator light flashes rapidly for twoseconds and then turns to a constant light,you have not programmed the HomeLinkbutton yet. Do the following:Press and hold the HomeLink button whileyou press and release the hand-heldtransmitter button every two seconds. TheHomeLink indicator light will flash slowlyand then rapidly once the HomeLinkfunction button recognizes and acceptsthe hand-held transmitter’s radiofrequency signal.After programming the HomeLink button,begin programming your garage dooropener motor.Note: You may need a ladder to reach theunit and you may need to remove the coveror lamp lens on your garage door opener.E142659To program additional buttons, repeatSteps 1 – 4.For questions or comments, please contactHomeLink at www.homelink.com or1-800-355-3515.Programming Your Garage DoorOpener Motor1. Press the learn button on the garagedoor opener motor and then you have30 seconds to complete the next twosteps.2. Return to your vehicle.128F150 (TF6) , enUSA