8b7PW0

Windows and MirrorsPOWER WINDOWS (IF EQUIPPED)WARNINGSDo not leave children unattended inyour vehicle and do not let them playwith the power windows. They mayseriously injure themselves.When closing the power windows,you should verify they are free ofobstructions and make sure thatchildren and pets are not in the proximityof the window openings.Note: Perform one-touch up re-calibrationwith the door closed. Calibrating with thedoor open will cause the window tocontinuously bounce back.To reset the function after the batteryrecharges:1. Pull the switch all the way up.2. Hold the switch until the glass stopsand continue to hold for two seconds.3. Press the switch down and operate thewindow to the full down position.One-touch up will now be functional.Bounce-Back (If Equipped)The window will stop automatically whileclosing. It will reverse some distance ifthere is an obstacle in the way.Overriding the Bounce-Back FeatureE163056Note: You may hear a pulsing noise whenjust one of the windows is open. Lower theopposite window slightly to reduce thisnoise.Press the switch to open the window.Lift the switch to close the window.One-Touch Up or Down (If Equipped)Press or lift the switch fully and release it.Press or lift it again to stop the window.Note: The window may disable for up tofive minutes if you cycle it up and downrepeatedly. This helps prevent damage tothe motor. Normal operation will resumeonce the motor cools.WARNINGWhen you override the bounce-backfeature, the window will not reverseif it detects an obstacle. Take carewhen closing the windows to avoidpersonal injury or damage to your vehicle.Pull up the window switch and hold withintwo seconds of the window reaching thebounce-back position. The window willtravel up with no bounce-back protection.The window will stop if you release theswitch before the window closes fully.Restoring the One-Touch Up FunctionYou may lose the one-touch function if thevehicle battery is low.75F150 (TF6) , enUSA