8b7PW0

Auxiliary Power PointsWhen the indicator light, located on thepower point, is:• on — the power point is ready to supplypower.• off — the power point power supply isoff; ignition is not on.• flashing — the power point is in faultmode.The power point temporarily turns offpower if the 150 watt limit is exceeded. Itcan also switch to a fault mode when it isoverloaded, overheated, or shorted. Unplugyour device and switch the ignition off, andthen switch the ignition back on foroverloading and shorting conditions. Letthe system cool off, and then turn theignition off, and then switch the ignitionback on for an overheating condition.The power points are not designed forelectric devices such as:• cathode ray tube type televisions• motor loads, for example vacuumcleaners, electric saws and otherelectric power tools, orcompressor-driven refrigerators• measuring devices which processprecise data, for example medicalequipment or measuring equipment• other appliances requiring an extremelystable power supply, for examplemicrocomputer-controlled electricblankets or touch sensor lamps.133F150 (TF6) , enUSA