8b7PW0

SeatsYou can also program a personal keylessentry code to recall a memory setting. SeeLocks (page 57).Easy Entry and Exit Feature (IfEquipped)If you enable the easy entry and exitfeature, it automatically moves the driver'sseat rearward 2 inches (5 centimeters)when the transmission selector lever is inposition P and you remove the key fromthe ignition.If the seat is located less than 2 inches (5centimeters) from the rear of the seattrack, the seat travel will be less than 2inches (5 centimeters) rearward.The driver's seat will return to the previousposition when you put the key in theignition.You can enable or disable this featurethrough the information display. SeeInformation Displays (page 87).REAR SEATSFolding Up the Rear Seats (SuperCab)The rear seat has a split 60/40 cushion.You can flip each seat cushion up into avertical storage position.2. Rotate the seat cushion up until it locksinto the vertical storage position.Returning the Seat to the SeatingPositionWARNINGMake sure that cargo or any objectsare not trapped underneath the seatcushion before returning the seatcushion to its original position, and that theseat cushion locks into place. Failure to doso may prevent the seat from operatingproperly in the event of a crash, whichcould increase the risk of serious injury.1. Pull the control on the side of the seatto release the seat cushion from thestorage position.2. Push the seat cushion down until itlocks into the horizontal position.Folding up the Rear Seat Cushion(Super Crew)The rear seat has a split 60/40 cushion.You can flip each seat cushion up into avertical storage position.E166703E162737Rotate the seat cushion up until it locksinto the vertical storage position.1. Pull the control to release the seatcushion.119F150 (TF6) , enUSA