8b7PW0

MaintenanceHeadlamp Aiming TargetE142592ABCD8 feet (2.4 meters)Center height of lamp to ground25 feet (7.6 meters)Horizontal reference lineE1673584. For vehicles with halogenheadlamps: on the wall or screen youwill observe a light pattern with adistinct horizontal edge toward theright. If this edge is not at the horizontalreference line, you will need to adjustthe beam so the edge is at the sameheight as the horizontal reference line.Vertical Aim Adjustment1. Park the vehicle directly in front of awall or screen on a level surface,approximately 25 feet (7.6 meters)away.2. Measure the height from the center ofyour headlamp (indicated by a 3.0millimeter circle on the lens) to theground and mark an 8 foot (2.4 meter)horizontal reference line on the verticalwall or screen at this height (a piece ofmasking tape works well).Note: To see a clearer light pattern foradjusting, you may want to block the lightfrom one headlamp while adjusting theother.3. Turn on the low beam headlamps toilluminate the wall or screen and openthe hood. Cover one of the headlampsso no light hits the wall.E1638065. Locate the vertical adjuster on eachheadlamp. Use a #2 Phillipsscrewdriver to turn the adjuster eithercounterclockwise or clockwise in orderto adjust the vertical aim of theheadlamp.250F150 (TF6) , enUSA