8b7PW0

SeatsPower Lumbar (If Equipped)12E162734E164101The control is located on the outboard sideof the seat. Press the forward or rearwardside of the control for more or less support.MEMORY FUNCTION (IF EQUIPPED)WARNINGSBefore activating the seat memory,make sure that the area immediatelysurrounding the seat is clear ofobstructions and that all occupants areclear of moving parts.Do not use the memory functionwhen your vehicle is moving.This feature will automatically recall theposition of the driver's seat, power mirrors,optional adjustable pedals and optionalsteering column.The memory control is located on theoutboard side of the driver's seat.Saving a Pre-Set Position1. Switch the ignition on.2. Move the memory features to thedesired positions using the associatedcontrols.3. Press and hold button 1 for about twoseconds until you hear a single chime.To program position 2, repeat the previousprocedure using button 2.Note: You can save a memory pre-set atany time.Recalling a Pre-Set Position:Press and release the pre-set memorybutton desired. The seat, mirrors, pedalsand steering column will move to theposition stored for that pre-set.Note: If the easy entry and exit feature isenabled, any memory recall while theignition is off will move the seat and steeringcolumn to the easy entry position.You can recall a programmed memoryposition:• When the ignition is off.• Or only if the transmission is in park (P),neutral (N), or if the ignition is on.You can program a remote entrytransmitter to recall a memory setting.See Keys and Remote Controls (page49).118F150 (TF6) , enUSA