Manual optoNCDT 1402 - Micro-Epsilon

Laser ClassDuring operation of the sensor the pertinent regulations acc. to IEC 60825-1: 2007 on „radiation safety oflaser equipment“ must be fully observed at all times. The sensor complies with all applicable laws for themanufacturer of laser devices.Do not look directly intothe laser beam!Possible injury of theeyes. Close your eyesor turn away promptlyif laser radiation strikesyour eyes.teach inlaser onstateoptoNCDTLASER RADIATIONDo not stare into the beamCLASS 2 LASER PRODUCTIEC 60825-1: 2007P≤1mW; =670 nmLaser spotFig. 1 True reproduction of the sensor with its actual location of the warning labelsLaser operation is indicated by LED.Although the laser output is low looking directly into the laser beam must be avoided. Due to the visible lightbeam eye protection is ensured by the natural blink reflex.The housing of the optical sensors optoNCDT1402 may only be opened by the manufacturer, see Chap. 14..For repair and service purposes the sensors must always be sent to the manufacturer.optoNCDT 1402Page 10