Manual optoNCDT 1402 - Micro-Epsilon

Serial Interface RS4228.4.18 Search Threshold, SET_THRESHOLDName:Description:SET_THRESHOLDDefines the characteristics of the search threshold.Parameter:--X = 0 --> lower than standard--X = 1 --> Standard--X = 2 --> higher than standard--X = 3 --> highestiChanging the threshold from factory default (standard) may influence linearity and resolution.Modify the sensor only with specific materials as with semitransparent plastics and so educate the sensorrecently.Format: 31 24 23 16 15 8 7 0 hex„+“ „+“ „+“ 0x0d („CR“) 0x2B2B2B0D„l“ „L“ „D“ „1“ 0x494C44310x20 0xFC 0x00 0x03 0x20FC00030x00 0x00 0x00 0x0X 0x0000000XReply: 31 24 23 16 15 8 7 0 hex„l“ „L“ „D“ „1“ 0x494C44310xA0 0xFC 0x00 0x02 0xA0FC00020x20 0x20 0x0D 0x0A 0x20200D0AoptoNCDT 1402Page 69