Manual optoNCDT 1402 - Micro-Epsilon

Serial Interface RS422• Measurement rate: 0 --> 1500 Hz,• Baud rate: 0 --> 115200 Baud,• Digital output type: 0 --> binary,• Analog digital output mode: 0 --> continuous,• Output time --> 500 ms,• Key lock: 2 --> key locked automatically after 5 min power on,• Save settings mode: 1 --> transmitted new settings are stored in the FLASH,• External input type: 0 --> external input for scalingProcedure: The sensor replies and then re-boots. The string of the boot message contains “CI140x“, “CR““LF“ and the answer of “GET_INFO“.Format: 31 24 23 16 15 8 7 0 hex„+“ „+“ „+“ 0x0d („CR“) 0x2B2B2B0D„l“ „L“ „D“ „1“ 0x494C44310x20 0xF1 0x00 0x02 0x20F10002Reply: 31 24 23 16 15 8 7 0 hex„l“ „L“ „D“ „1“ 0x494C44310xA0 0xF1 0x00 0x02 0xA0F100020x20 0x20 0x0D 0x0A 0x20200D0AoptoNCDT 1402Page 74