Manual optoNCDT 1402 - Micro-Epsilon

Serial Interface RS422Reply: 31 24 23 16 15 8 7 0 hex„l“ „L“ „D“ „1“ 0x494C44310xA0 0x49 0x00 0xxx 0xA04900xxInfo string is a readable ASCII character string:ILD 1402: StandardA/N: 4120154O/N: 000S/N: 1234570MR: 50SoftVer: 1.001.796BootVer: 1.001.16Date: 09/01/23Out Channel: analog | digitalAnalog Error: last value | error value | error value after cycles xx //xx is 2 up to 99Filter Type: moving average | medianFilter Number: xx //with moving average xx is 1 up to 128, with median xx is 7, 5, 7 or 9Scanrate: xxHz //xx is 1500 Hz, 1000 Hz, 750 Hz, 375 Hztype of digital output: binary | asciimode of analog/digital output: continuous | time | triggeroutput time: xx //xx is time in ms 1key status: unlock | lock | auto lockmode of save setting: no save | save at each timemode of extern input: as teach in | as output triggerpeak searching: global maximum | first peak | last peakTeach value 1: xx //(xx is 1.0 up to 16368.0Teach value 2: xx //xx is 1.0 up to 16368.00x20 0x20 0x0D 0x0A 0x20200D0A| = separates variants from each other// = beginning of a comment1) Output time is available only, if ”mode of analog/digital output“ is set to ”time”optoNCDT 1402Page 54