Manual optoNCDT 1402 - Micro-Epsilon

Serial Interface RS422Default setting:Teach value 1: 0.0Teach value 2: 16368.08.4.25 Scaling Values for the Analog Output, SET_TEACH_VALUEName:Description:SET_TEACH_VALUESets the scaling values.Parameter:--Teach value 1, XXXXXXXX --> 0.0 up to 16368.0--Teach value 2, XXXXXXXX --> 0.0 up to 16368.0Format: 31 24 23 16 15 8 7 0 hex„+“ „+“ „+“ 0x0d („CR“) 0x2B2B2B0D„l“ „L“ „D“ „1“ 0x494C44310x20 0xF9 0x00 0x04 0x20F900040xXX 0xXX 0xXX 0xXX 0xXXXXXXXX0xXX 0xXX 0xXX 0xXX 0xXXXXXXXXReply: 31 24 23 16 15 8 7 0 hex„l“ „L“ „D“ „1“ 0x494C44310xA0 0xF9 0x00 0x02 0xA0F900020x20 0x20 0x0D 0x0A 0x20200D0AThe teaching process requires a valid measuring signal. The teaching process is terminated at „no target“,„target not evaluated“, „to close to the sensor“ - beyond SMR“ or „to far from the sensor - beyond EMR“.optoNCDT 1402Page 76