Intel® Extended Memory 64 Technology Software Developer's Guide

ADDSUBPS—Packed Single-Precision Floating-Point Add/SubtractOpcode Instruction 64-Bit Mode Compat/LegModeF2 0F D0 /rADDSUBPS xmm1, xmm2/m128DescriptionValid Valid Add/subtract single-precision floating-pointvalues from xmm2/m128 to xmm1.IA-32e Mode OperationEnables access to XMM8-XMM15 registers.SIMD Floating-Point ExceptionsOverflow, Underflow, Invalid, Precision, Denormal.Protected Mode Exceptions#GP(0)For an illegal memory operand effective address in the CS, DS, ES, FS or GS segments.#GP(0)If memory operand is not aligned on a 16-byte boundary, regardless of segment.#SS(0)For an illegal address in the SS segment.#PF(fault-code) For a page fault.#NMIf TS in CR0 is set.#XM If an unmasked SIMD floating-point exception and OSXMMEXCPT in CR4 is 1.#UD If an unmasked SIMD floating-point exception and OSXMMEXCPT in CR4 is 0.If EM in CR0 is set.If OSFXSR in CR4 is 0.If CPUID feature flag SSE3 is 0.Real-Address Mode Exceptions#GP(0)If memory operand is not aligned on a 16-byte boundary, regardless of segment.#GP(0)If any part of the operand lies outside the effective address space from 0 to FFFFH.#NMIf TS in CR0 is set.#XM If an unmasked SIMD floating-point exception and OSXMMEXCPT in CR4 is 1.#UD If an unmasked SIMD floating-point exception and OSXMMEXCPT in CR4 is 0.If EM in CR0 is set.If OSFXSR in CR4 is 0.If CPUID feature flag SSE3 is 0.Virtual-8086 Mode ExceptionsSame exceptions as in Real Address Mode#PF(fault-code)For a page fault.Compatibility Mode ExceptionsSame as protected mode exceptions.Vol. 1 2-29