h16tp(x - AJ Maskin AS

Sheet DP034BREAKDOWN DETECTION FLOW CHARTMACHINE TRAVEL SPEED DOES NOTCORRESPOND TO THE SELECTOR SPEEDFolio 4/4DOpen the platform control panelPlace the speed selector SA11on «low speed»Place the speed selector SA11on «medium speed»Place the speed selector SA11on «high speed»Check the setpoints at theterminals of selector SA11Check the setpoints at theterminals of selector SA11Check the setpoints at theterminals of selector SA11ESA11a = 0V (804)SA11b = 12V (805)NONOSA11a = 0V (804)SA11b = 0V (805)NOSA11a =12V (804)SA11b = 0V (805)YESReplace thespeed selectorSA11See FicheC044YESFEYESEND- Open the turntable controlpanel.- Check for 12V voltage onterminal 805.Replace the U1moduleSee FicheC058 or C107- Open the turntable controlpanel.- Check for 12V voltage onterminal 804.12VOKNOThe faultpersistsNO12VOKNOYESReplace wiringharness 805YESENDYESFENDReplace the printedcircuitFSee FicheC063FReplace wiringharness 804END