h16tp(x - AJ Maskin AS

CORRECTIVE MAINTENANCE SHEETSheet C122 Folio 1/1CHANGING A MOTOR COVERCaution!Do not use the machineduring maintenanceoperations.11 - Preliminary operations• Put the machine in the maintenance configuration (see correspondingparagraph).• Switch off electric power (see corresponding paragraph).2 - Removing a cover• Open the motor cover.• Dismount the support (1).• Remove the cover’s two support washers (2) (on the right and left side ofthe cover support).• Remove the locking pins from the upper ball pivots on the 2 gas springs(3).• Free the ball pivots from the 2 pin gas springs.• Put in slings then close the cover.• Remove the cover by raising it to free it from the two supports (4).3 - Installing a cover• Put a new cover into place and position on the supports (4).• Put the washers (2), gas spring ball pivots (3) and locking pins into placeon the pins.• Re-mount the support (1)• Put the machine back in the operational configuration.• Check that the cover opens and closes properly.NB:When re-installing a cover, adjustment may be necessary. For thispurpose, supports (1) and (4) are equipped with adjustment lights.332244