h16tp(x - AJ Maskin AS

135 Repair manual5.6 - JIB5.6.1 - UpIf (SA6b=1 or SA7b=1) and (SQ1=1 or machine folded) and (SQ6=1 or turntableposition)then YV18b=1 and YV2a=1 and YV1=1YV1 is time delayed for 2 secondsmachine folded => SQ2=1 and SQ9=1 and SQ3=1If SQ6 passes to O during a movement, this one is not cut.5.6.2 - DownIf (SA6a=1 or SA7a=1) and (SQ6=1 or turntable position)then YV18a=1 and YV2a=1 and YV1=1YV1 is time delayed for 2 secondsIf SQ6 passes to O during a movement, this one is not cut.5.7 - STEERINGRear Axle5.7.1 - LeftIf SM4d=1 then YV16a=1 and YV2b=1 and YV1=1YV1 is time delayed for 2 seconds5.7.2 - RightIf SM4c=1 then YV16b=1 and YV2b=1 and YV1=1YV1 is time delayed for 2 seconds5.8 - TRANSLATIONLS MV HS MicroSIf SQ2=0 or SQ3=0 or SQ9=0 then MicroS=1If MicroS=0 then NoMicroS=1If SA11a=0 and SA11b=1 and NoMicroS=1 and SM4ab=0 and HM4Ý then LS=1If SA11a=0 and SA11b=0 and NoMicroS=1 and SM4ab=0 and HM4Ý then MV=1If SA11a=1 and SA11b=0 and NoMicroS=1 and SM4ab=0 and HM4Ý then HS=1If NoMicroS=1 and HS=1 then YV8=1 and YV1=1If (HS=1 or MV=1) and NoMicroS=1 then YV12=1 and YV10=1 andYV1=1If SM4ab=1 and HM4=1et (SQ1=1 or machine folded)and SM31ab=0 andSM2ab=0then YV6 and YV7 LS MV HS : Full setpointMicroS : low setpointYV1 is time delayed for 2 secondsIf SQ6 passes to O during a movement, this one is not cut.machine folded => SQ2=1 and SQ3=1 and SQ9=132