h16tp(x - AJ Maskin AS

Sheet DP022BREAKDOWN DETECTION FLOW CHARTNO MOTOR ACCELERATION ON ACTIVATING THEACCELERATOR SWITCH SA2 FROM THETURNTABLE CONTROL PANELFolio 1/2No motor acceleration on activating theaccelerator switch SA2 from theturntable control panel- Place the key switch in the platform position- Press the pedal and make a telescoping movementfrom the platform.- Check that the motor acceleratesOpen the turntable controlpanel and check the state offuse FU3NOThe motoracceleratesYESFuseOKYESNOReplace fuse FU3- Open the turntable control panel- Place the key switch in the turntableposition and activate the accelerator switchSA2 from the turntable control panel- Check for 12V voltage on terminal 605 ofthe printed circuitENDVoltageOKNO- Open the turntable control panel- Place the key switch in the turntable positionand activate the accelerator switch SA2 from theturntable control panel- Check for 12V voltage on terminal 118 of theprinted circuit.YESReplace theaccelerator switchSA2See FicheC044ARepair the connection or replacethe electric wiring harness betweenthe accelerator switch SA2 and theprinted circuit of the turntablecontrol panelENDEND