h16tp(x - AJ Maskin AS

Sheet C055CORRECTIVE MAINTENANCE SHEETCHANGING THE BASKET ROTATION GEARINGFolio 1/21 - Preliminary operations• Put the machine in the maintenance configuration (see correspondingparagraph).• Switch off electric power (see corresponding paragraph).• Remove the basket (see corresponding sheet).• Remove the basket rotation hydraulic motor (see corresponding sheet).Caution!It is essential to put thecomponent into slings beforedismantling/re-assembling it.2 - Removing the gearing• Remove the motor fixing flange (1).• Remove the endless screw (2) and adjustment washers (3), if any.• Remove the Stauff collar fixing screw (4). Retain the toothed washer (5),spacer (6) and spacer washer (7).• Remove the cap (8), then the platform link part (9) and Nylatron washer(10).• Remove the nylstop nut (11), bushing (12), elastic washers (13), plate(14).• Remove the articulation pin assembly (15) then the disk (16) and pad (17).• Remove the screws and washers (18) and (19) and remove the pin (15),tangent wheel (22), keys (17), hub (20), key (21),3 - Installing the gearing• Replace rings, pads and keys if necessary.• Put into place on the articulation pin (15), the key (21), hub (20), 2 keys(17), tangent wheel (22). Put back screws and washers (18) and (19).• Put the disk (16) and pad (17) into place, then the articulation pin assembly(15).• Put into place the plate (14), elastic washers (13), bushing (12), then thenylstop nut (11).• Put into place the Nylatron washer (10), platform link part (9), cap (8),spacer washer (7), spacer (6) and Stauff collar.• Fix the assembly using the screw (4) eqipped with a new toothed washer.• Install the endless screw (2) and adjustment washers (3) if necessary.• Install the motor fixing flange (1).• Install the basket rotation hydraulic motor (see corresponding sheet).• Install the basket (see corresponding sheet).• Lubricate the gearing.NB:Only use lubricants recommended by the manufacturer.• Put the machine back into the operational configuration.