12.07.2015 Views

h16tp(x - AJ Maskin AS

h16tp(x - AJ Maskin AS

h16tp(x - AJ Maskin AS

SHOW MORE
SHOW LESS
  • No tags were found...

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Sheet C128CORRECTIVE MAINTENANCE SHEETCHANGING THE SLEW RINGFolio 3/63Photo 111 22 - Removing the ring• Mark then disconnect the hoses (ref. 1 and 2 Photo 11) of the rotation reducinggear (ref. 3 Photo 11) hydraulic motor (ref. 4 Photo 11).• Put caps on the connectors.NB:Unscrew the hoses slowly to release residual hydraulic pressure.• Unscrew the four screws (ref. 5 Photo 11) and washers fixing the reducinggear to the turntable.• Unscrew the reducing gear’s 4 adjusting screws (ref. 6 Photo 11).• Remove the reducing gear.• Secure the slew ring on the forks of a lift truck and unscrew the 31 screws(ref.1 Photo 11) and washers holding the ring to the turntable.6 5 4Photo 121

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!