12.07.2015 Views

h16tp(x - AJ Maskin AS

h16tp(x - AJ Maskin AS

h16tp(x - AJ Maskin AS

SHOW MORE
SHOW LESS
  • No tags were found...

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Sheet C128CORRECTIVE MAINTENANCE SHEETCHANGING THE SLEW RINGFolio 2/6Photo 4• In the chassis box, mark and disconnect the electric wires coming from theswing joint (Photo 4).• Remove the screw that blocks rotation on the lower part of the swing joint byslackening the counter-nut (ref. 1 Photo 5) and unscrew the screw (ref. 2Photo 5).• Bring the electric wiring harness and hoses under the hydraulic swing joint.• Put the turntable assembly into slings (see Photo 6 and Photo 7)Photo 6Photo 7Photo 51 2Photo 8• Unscrew the 28 screws and remove the flat washers fixing the ring onto thechassis (see Photo 8).• Place the turntable assembly onto suitable safety stands (see Photo 9 andPhoto 10).Photo 9Photo 10

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!