h16tp(x - AJ Maskin AS

Sheet DP018BREAKDOWN DETECTION FLOW CHARTNO TURNTABLE ROTATION MOVEMENT(RIGHT AND / OR LEFT) FROM THE PLATFORM(OR TURNTABLE) CONTROL PANELNo turntable rotation movement (rightand/or left) from the platform (or turntable)control panelFolio 1/3- Place the key switch in the turntable (or platform) position- Activate the lifting switch from the turntable control panel SA15(or the rotation manipulator SM2 from the platform control panel- with the pedal activated)LiftingmovementOKYESNOAOpen the platform (or turntable)control panel and check the wiring ofthe rotation manipulator SM31 (orrotation switch SA15)WiringOKNORepair wiringTurntable panelrotation faultYESPlatform panelrotation faultEND- Place the key switch in the turntableposition.- Open the turntable control panel.- Activate the rotation switch (SA15) andcheck for 12V on terminals 517 or 516 ofthe printed circuit.- Place the key switch in the platform position.- Open the platform control panel.- Press the pedal and tilt the rotation manipulator as far aspossible.- Check for 0.5V or 4.5V voltage (depending on thedirection of movement) on terminal 512 of the printedcircuit.WiringOKNOReplace the rotationmanipulator SM31 (or liftingswitch SA15).See FicheC045 (FicheC044)YESRepair the connection or replace the electric wiringharness between the rotation manipulator SM31 (orrotation switch SA15) and the printed circuit in theturntable control panel.ENDEND