h16tp(x - AJ Maskin AS

CORRECTIVE MAINTENANCE SHEETSheet C041 Folio 1/1CHANGING THE TILT SENSOR BUZZERCaution!Do not use the machineduring maintenanceoperations.HA16/18PX - HA46/51JRT211 - Preliminary operations• Switch off electric power (see corresponding paragraph).2 - Removing the buzzer• Mark and disconnect the buzzer’s electric connections (1).• Remove the buzzer by unscrewing the fixing bolts (2).3 - Installing the buzzer• Put the buzzer back into place and fix with the fixing bolts.• Reconnect the electric connections according to the marks made duringdismantling.4 - Test• Put the machine back into the operational configuration.• Extend the machine, tilt the tilt sensor and check that the buzzer sounds.HA16/18PX New designHA46/51JRT New Design1 2Caution!The buzzer should be audiblefrom the basket.