h16tp(x - AJ Maskin AS

CORRECTIVE MAINTENANCE SHEETSheet C123 Folio 1/1CHANGING A CONTROL PANEL COVERAttention !Do not use the machineduring maintenanceoperations.1 - Preliminary operations• Put the machine in the maintenance configuration (see correspondingparagraph).• Switch off electric power (see corresponding paragraph).2 - Removing a cover• Open the control panel cover.• Remove the cover’s two support washers (1) (on the right and left side ofthe support).• Remove the locking pins from the upper ball pivots on the 2 gas springs(2).• Free the ball pivots from the 2 pin gas springs.• Close the cover and raise to free it from the two supports (3).• Remove the cover.3 - Installing a cover• Position the cover on the supports (3).• Put into place on the pins the washers (1), ball pivots (2) (on the gassprings), and locking pins.• Check that the cover opens and closes properly.• Put the machine back in the operational configuration.NB:When installing a new cover, adjustment may be necessary. For thispurpose, the supports (3) are equipped with adjustment lights.1 2 3