h16tp(x - AJ Maskin AS

CORRECTIVE MAINTENANCE SHEETSheet C054 Folio 1/1CHANGING A WEIGHING SYSTEM ROLLING BEARING121 - Preliminary operations• Put the machine in the maintenance configuration (see correspondingparagraph).• Switch off electric power (see corresponding paragraph).• Remove the basket (see corresponding sheet).2 - Removing the rolling bearing• Remove the screws (1) from the rolling bearing track.• Remove the rolling bearing track (2).• Remove the circlips (4), then the ball bearings (3).3 - Installing the rolling bearing• Put new rolling elements on the bearing track. Block in travel using the circlips.• Lubricate the rolling bearings.NB:Only use lubricants recommended by the manufacturer.43• Re-install the basket (see corresponding sheet).• Put the machine back in the operational configuration.