h16tp(x - AJ Maskin AS

CORRECTIVE MAINTENANCE SHEETSheet C125 Folio 1/1CHANGING A FRONT COVER ON THE MOTOR OR TANKSIDECaution!Do not use the machineduring maintenanceoperations.1 - Preliminary operations• Put the machine in the maintenance configuration (see correspondingparagraph).• Switch off electric power (see corresponding paragraph).2 - Removing a cover• Open the large motor cover.• Open the spring clip (1).• Put the cover in slings.• Remove the cover by raising it until the support pins (2) are free of thebosses fixed to the side plate.123 - Installing a cover• Put a new cover into place and position so that the support pins are facingthe bosses (2).• Lock the spring clip (1)• Put the machine back in the operational configuration.• Check that the cover opens and closes properly.