Single-Chip Low Cost Low Power RF-Transceiver (Rev. A)

CC25000x2C: TEST2 – Various test settingsBit Field Name Reset R/W Description7:0 TEST2[7:0] 152 (0x88) R/W The value to use in this register is given by the SmartRF ® Studiosoftware.0x2D: TEST1 – Various test settingsBit Field Name Reset R/W Description7:0 TEST1[7:0] 49 (0x31) R/W The value to use in this register is given by the SmartRF ® Studiosoftware.0x2E: TEST0 – Various test settingsBit Field Name Reset R/W Description7:0 TEST0[7:0] 11 (0x0B) R/W The value to use in this register is given by the SmartRF ® Studiosoftware.31.3 Status register details0x30 (0xF0): PARTNUM – Chip IDBit Field Name Reset R/W Description7:0 PARTNUM[7:0] 128 (0x80) R Chip part number0x31 (0xF1): VERSION – Chip IDBit Field Name Reset R/W Description7:0 VERSION[7:0] 3 (0x03) R Chip version number.0x32 (0xF2): FREQEST – Frequency Offset Estimate from demodulatorBit Field Name Reset R/W Description7:0 FREQOFF_EST R The estimated frequency offset (two’s complement) of thecarrier. Resolution is F XTAL /2 14 (1.59 - 1.65 kHz); range is ±202kHz to ±210 kHz, dependent of XTAL frequency.Frequency offset compensation is only supported for FSK andMSK modulation. This register will read 0 when using OOKmodulation.PRELIMINARY Data Sheet (Rev.1.2) SWRS040A Page 75 of 83