Untitled - Uhlenbrock

MARCoA.3 MARCo-Receiver Factory defaultsYou can set the MARCo-Receiver to the above values with a RESET, by programming theLNCV 2 to 99. The value for the addresses in LNCV 1 and 2 remains unchanged.Function LNCV Description ValueBasic settings0 Module address, and track 1 address 11 Address Track 2 (2. Single detectors) for Track 2, or as2feedback address used in automatic functions 4 - 282 Direction sensitive switch mode 215 Save module operation mode at power off 817 8 valid address bytes must be received via RailCom before 8the address is accepted.18 5 seconds before the automatic start 519 Startup time in 0.5s 1Switch Function 1 20 For all trains 2000030 ...The light 140 ...Turn off if direction S1 -> S2 2Switch Function 2 21 For all trains 2000031 ...The light 141 ...Turn on if direction S2 -> S1 1182